PCD Heads Flooring

Dynatech PCD Flooring Heads

At A Glance

If you’ve been in the flooring business longer than a day, you know the amount of prep work that goes into creating a quality hard-floor surface.

Now Dynatech is bringing their “cutting-edge” PCD products to the hard-surface flooring market. Contact Us

dynatech-top-of-flooring-page

Dynatech Flooring Heads Tackle Most Any Flooring Surface

  • Sticky Adhesive
  • Thick Epoxy
  • Paint
  • Thermoplastic
  • Rubber
  • Polyurea

Dynatech Flooring Heads Work On the Following Types of Floor Applications

  • Polished Concrete Floors
  • Industrial Looking Flooring

Dynatech has the diamond experience and expertise to make your job more profitable.

A Totally Different Way To Grind

It takes time, and lot’s of it, to get a raw unfinished surface to the place where proper application of a top coat is possible. And if you attempt to cut corners by pressure washing the prep surface with acid water … you can say goodbye to offering any meaningful warranty.

Chances are you’ll be back in a few years doing costly repairs and trying to explain to the now visibly frustrated building owner why it is you’re back in the first place.

Frustrations Many Flooring Contractors Face

Consider the following frustrations many flooring contractors face when taking on a new job:

  • Lengthy time-intensive process — It takes a long time to complete each step of prepping a floor to receive a new hard surface. While cutting corners may buy you a little time on the frontend, you’re likely to pay for it sooner or later when your new hard surface begins to loosen and crack.
  • Multiple passes — It often takes several passes back and forth over the same area to prep a floor surface to receive a new hard coat. These passes add up, not only costing you precious time on the job but also additional wear and tear on your equipment.
  • Regularly need to change cutters or rebuild drums — It’s common to need equipment repairs, such as changing cutters or rebuilding drums, throughout the course of a project. Not only does this add additional time to your work but also shifts the momentum for those on your job site. It can be hard to recover from such interruptions especially if they happen more than once.
  • Need to stock up on carbide cutters — Any time two hard surfaces hit each other repeatedly, there is going to be friction and wear. Traditional carbide cutters are no exception to this rule. If you’re using anything other than Dynatech technology you’re simply going to need to keep more carbide cutters in inventory which will cost you money.

A Brand New Tool from Dynatech for Epoxy & Coating Removal and Polished Concrete Floor Prep

Known for their innovative, cutting-edge technology, Dynatech is well respected within the PCD Milling Head and PCD Scarify Head Industry.

Dynatech’s product line is responsible for thousands of miles of pavement line remove and road marker inlays.

They are also big players in the scarifying business helping contractors etch protective-grip surfaces into driveways, parking lots and the concrete floors of industrial plants and storage facilities.

Now Dynatech is bringing their “cutting-edge” products to the hard-surface flooring market.

Dynatech PCD Flooring Heads

Dynatech uses Polycrystalline Diamond, or PCD, as the main component in their Cutterz.

Diamond is the hardest and most abrasion resistant of all materials. And PCD is a composite of diamond particles sintered together with a metallic binder.

    • Faster and Lasts Longer Than Anything You’ve Ever Seen
      Polycrystalline Diamonds are the only type of diamonds that have self-sharpening properties. This PCD structure opens new sharp edges with every use by releasing an outer layer of dull microcrystallites.
      Dynatech Cutterz’s self-sharpening properties enable you to work faster for longer periods of time without requiring costly downtime to fix or sharpen equipment.
    • Don’t BEAT the Surface – Gently SHAVE It
      Dynatech Cutterz sharp edge properties enable you to “shave” NOT “beat” your floor surface when prepping for hard coat application.
      Think of a saw blade head hitting the hard surface of concrete all at once … and the tremendous torque and power an engine would need to make this happen.
      Now contrast this with the unique engineering of Dynatech PCD Cutterz. Shaped in a cylindrical pattern, like a barber pole, each cutter shaves away a hard surface in 1/10th of a second. Then the next cutter whirls around and shaves off more surface area in 1/10 of a second, and then another and another … you get the picture.
    • Patented – You’ll Only See it From Us

 

    Dynatech is the patent holder for the PCD “cutting-edge” technology they employ. If you want the best — get it from Dynatech.

For more information please call 1-800-446-9001 or go [HERE] to place your order today.

What You Can Expect Using Dynatech Products:

  • Save Time, Labor, Materials, Money
  • Remove Epoxy And Coatings With Ease
  • Get Down to the Smooth Bare Aggregate FASTER
  • Makes Polished Concrete Floor Prep Faster
  • Is 4x Times Faster and Longer Lasting than Diamond Blades – That’s 30+ Times the Life of Carbide Cutters
  • Dynatech’s System is Better Engineered and Gives a Glass Smooth Finish
  • One Drum Will Outlast 25-30 Scarify Drums … Saves You Time and Hours by NOT Rebuilding Scarify Heads
  • Fits Any Scarify Machine … Also Bigger Sizes Available for Grinding and Grooving Machines
  • Changes the Possibilities of Using Your Scarifying Machines
  • Dynatech’s Rounds Give You a Corduroy Footprint
  • Dynatech’s Smaller PCD Heads Make Fast Work Out Of Epoxy And Other Coatings Removal Jobs

Dynatech Flooring Heads Work On the Following Types of Floor Applications

  • Polished Concrete Floors
  • Industrial Looking Flooring
  • Wooden Floors

Dynatech Flooring Heads Tackle Most Any Flooring Surface

  • Sticky Adhesive
  • Thick Epoxy
  • Paint
  • Thermoplastic
  • Rubber
  • Polyurea

Diamonds from the Diamond People

Dynatech has the diamond experience and expertise to make your job more profitable.

We offer a diamond head like no other. Our new patented system will make your operation faster and your cutting heads will last longer.

  • Increase Your Profit
  • Dynatech’s Flat Cutterz Give A Smooth Flat Beautiful Finish
  • One Pass … Thick Epoxy Removal
  • Go From Sticky Adhesive To Smooth, Bare Aggregate